How to Build and Paint a Picket Fence

Posted on

How to Build and Paint a Picket Fence – Many people think about fences being very fashionable. What is not as good as they are the high maintenance required and the fact that you have to pay a lot more from someone else to install it. If these problems are not so important to you and you really want a picket fence in your garden, then the following information will be of great help to you.

How to Build and Paint a Picket Fence


Necessary materials

It is most likely to buy standard size pickets and modify them as you wish, because pre-cut piles are very difficult to find. If you have a good plan, you can save all the pieces of wasted material, knowing from the beginning, how many pieces you will need. What you have to establish is the length and height of the fence. You will also have the width of the pickets. In this way, the amount of wood you will use will be very easily calculated.


The pickets of the fence

Using a circular saw is the best way to speed things up a bit, especially if the pickets will be torn from a piece of wood that is wider than the final product. With a planing saw you can do much better and save your pickets from traversing the planer.


The fence line

First of all, you have to start building the wall by installing the corner posts. Once you have done this, you will use a wire that goes from one place to another in order to keep the fence straight. If you do not like this method you can also use a spray can to draw a line on the floor to guide you through the installation.
The installation of the poles

Before installing the posts, you have to measure the distance between them and mark each place where the posts will be placed on the ground. Using a post bore digger, you have to dig for each post about 30% of its length. Some gravel will not hurt and will help you for better drainage in case the fence is somewhere near a sprinkling area. When you have to fill the hole, careful to pack the dirt and also fill the plumb post is necessary.


Rails and pickets

The rails you install need to be level and the nails you use to attach the pickets must be galvanized or non-rusting. The space between the pickets has to be the same on the rails.


The painting

It would be best not to let the paint stay on the floor and that is why you should wear something to put under the fence. A brush would be much better than a pistol because with it you can have better control and the paint will not be consumed so fast. Before actual painting, you have to apply a layer of primer and then you can apply the color you want.

Please rate this

Leave a Reply